- $70.00
Stepper Motor Driver - CWD860-A
Stepper Motor Driver CWD860-A
Step Motor Driver Voltage: 20VAC~60VAC OR 24VDC~90VDC
Stepper Motor Driver Current: 2.4AMPER~7.2AMPER
Stepper Motor Driver Nema: Nema 34
Stepper Motor Driver Phase: 2 Phase
Product Code: Step Motor Driver CWD860-A
Stepper Motor Driver CWD860-A Click to Review
Click to Review CWD860-A Parameter Settings
You can download the datasheet file by clicking on the product code.
2 Phase Stepper Motor Driver CWD860-A
- Jumper settings must be made with the drive turned off for safety.
- Ampere settings of the motor will be matched to the RMS setting of the driver.
- Grounding must be done to the metal part of the panel where the drivers are located. Before giving Ampere to the drivers, voltage control must be done by inserting a measuring device between the NEUTRAL and GROUND wires. The ideal situation is zero volts.
- PULSE and DIR signals must be sent as 5V on PLC, Arduino, Axis control card or specially designed cards. For devices with signal output over 5 Volts, a resistance must be entered in the PULSE and DIR signal output cables to be distributed one by one in minus or plus driving. Example The required resistance for 24Volt output is 1.8KΩ.
