Servo Motor Control with PLC in PULSE/DIR Mode

Thanks to the servo drivers used, all position and speed adjustments of the servo motor, such as start and stop ramps and rotation speed, can be made. In order to transmit these settings to the servo motor digitally, PLC, Arduino, specially designed cards, control units, PCI or external motion control cards and axis control cards designed to send pulses prepared via the computer are used.PLC (Programmable Logic Controller) is a system consisting of programming sections through which we can control the servo motor with input / output connections. PLC consists of four main parts: CPU, memory, input and output units. You can carry out your work by proceeding from these sections so that you can control your operations on the servo motor. When PULSE/DIR input is made on Şahin Rulman servo motors, you can control the servo motor with PLC. PLC works to transfer the position, speed and start and stop ramp values ​​required for the system to the servo motor driver. In line with the orders from the frequency and direction output via PLC, the AC servo motor can start and start and move instead of constant speed.

Servo Motor Driver and PLC Connection

What you want to ask about the PLC connection made with the servo motor PULSE/DIR output: https://forum.sahinbearing.com/ section. You can visit Şahin Rulman website to find out the prices of servo motors and servo motor drivers and buy servo motors online.