- $40.00
Stepper Motor Driver - M542
Stepper Motor Driver M542
Step Motor Driver Voltage: 24VDC~50VDC
Stepper Motor Driver Current: 1.5AMPER~5.6AMPER
Stepper Motor Driver Nema: Nema 17, Nema 23, Nema 34
Stepper Motor Driver Phase: 2 Phase
Product Code: Step Motor Driver CWD556
Stepper Motor Driver CWD556 Click to View
You can download the datasheet file by clicking on the product code.
2 Phase Stepper Motor Driver M542
- Jumper settings must be made with the drive turned off for safety.
- Ampere settings of the motor will be matched to the RMS setting of the driver.
- Grounding must be done to the metal part of the panel where the drivers are located. Before giving Ampere to the drivers, voltage control must be done by inserting a measuring device between the NEUTRAL and GROUND wires. The ideal situation is zero volts.
- PULSE and DIR signals must be sent as 5V on PLC, Arduino, Axis control card or specially designed cards. For devices with signal output over 5 Volts, a resistance must be entered in the PULSE and DIR signal output cables to be distributed one by one in minus or plus driving. Example The required resistance for 24Volt output is 1.8KΩ.
